![Catalogue drawing (not a photograph) of 001 · The Welder, a one-piece laser-cut steel silhouette, 11.81 × 9.91 in [300 × 251.6 mm], shown with a suggested wood base and dimension lines](http://optikutz.com/cdn/shop/files/001_welder_catalogue_sheet.png?v=1794447603)
![Black silhouette preview of 001 · The Welder rendered from the cutting file (a drawing, not a photograph), 11.81 × 9.91 in [300 × 251.6 mm]](http://optikutz.com/cdn/shop/files/001_welder_preview.png?v=1794447603)
Tap a picture to open it full size.
001 · The Welder
11.81 × 9.91 in [300 × 251.6 mm]
Download the DXF (free)Free to download. No account, cart or checkout needed.
Please read before you cut
These cutting files are shared free and as-is. Pay attention to the details: check the size and units when you import the DXF, look over the thin parts, and always do a test cut on scrap before you run your good material. Kerf, settings and the smallest details that hold up are different on every machine.
A one-piece steel silhouette from our Professions series, cut on our 6 kW fiber laser in Niagara Falls, Ontario.
A welder in a full helmet leans over the workbench with a MIG torch, sparks flying off a part clamped to the bench.
The details
- Size: 11.81 × 9.91 in [300 × 251.6 mm], including the base plinth and tabs
- Cut as one connected piece, with no loose parts
- Intended stock: 16 ga [1.5 mm] mild steel (still to be confirmed)
- Weight: about 0.9 lb [0.39 kg], an estimate worked out from the design
- Designed so the same piece can stand in a slotted wood base on its two bottom tabs, or hang on the wall from two keyholes
- Original OptiKutz artwork
The cutting file (DXF) for this design is free to download: Download the DXF.
Our lasers, your vision, Canadian precision.